跳到主要内容
版本:v1.4

CPU Suppress

Introduction

In order to ensure the runtime quality of different workloads in co-located scenarios, Koordinator uses the CPU Suppress mechanism provided by koordlet on the node side to suppress workloads of the Best Effort type when the load increases. Or increase the resource quota for Best Effort type workloads when the load decreases.

In the Dynamic resource overcommitment model that is provided by Koordinator, the total amount of reclaimed resources dynamically changes based on the actual amount of resources used by latency-sensitive (LS/LSR/LSE) pods. Reclaimed resources can be used by BE pods. You can use the dynamic resource overcommitment feature to improve the resource utilization of a cluster by deploying both LS pods and BE pods in the cluster. To ensure sufficient CPU resources for the LS pods on a node, you can use koordinator to limit the CPU usage of the BE pods on the node. The elastic resource limit feature can maintain the resource utilization of a node below a specified threshold and limit the amount of CPU resources that can be used by BE pods. This ensures the stability of the containers on the node.

CPU Threshold indicates the CPU utilization threshold of a node. Pod (LS).Usage indicates the CPU usage of LS pods. CPU Restriction for BE indicates the CPU usage of BE pods. The amount of CPU resources that can be used by BE pods is adjusted based on the increase or decrease of the CPU usage of LS pods. We recommend that you use the same value for CPU Threshold and the reserved CPU watermark in the dynamic resource overcommitment model. This ensures a consistent level of CPU resource utilization.

CPU-Suppress

Setup

Prerequisite

  • Kubernetes >= 1.18
  • Koordinator >= 0.6

Installation

Please make sure Koordinator components are correctly installed in your cluster. If not, please refer to Installation.

Configurations

When installing through the helm chart, the ConfigMap slo-controller-config will be created in the koordinator-system namespace, and the CPU Suppress mechanism is enabled by default. If it needs to be closed, refer to the configuration below, and modify the configuration of the resource-threshold-config section to take effect.

apiVersion: v1
kind: ConfigMap
metadata:
name: slo-controller-config
namespace: {{ .Values.installation.namespace }}
data:
...
resource-threshold-config: |
{
"clusterStrategy": {
"enable": true,
"cpuSuppressThresholdPercent": 65
}
}

(Optional) Advanced Settings

Also, the CPU Suppress feature allows you to configure the CPU utilization threshold in a fine-grained manner. The following table describes the parameters.

ParameterData typeValid valueDescription
enableBooleantrue; falsetrue: enables the elastic resource limit feature; false: disables the elastic resource limit feature.
cpuSuppressThresholdPercentInt0~100The CPU utilization threshold of the node. Unit: %. Default value: 65.

Use CPU Suppress

  1. Create a configmap.yaml file based on the following ConfigMap content:
apiVersion: v1
kind: ConfigMap
metadata:
name: slo-controller-config
namespace: koordinator-system
data:
# Enable the elastic resource limit feature.
resource-threshold-config: |
{
"clusterStrategy": {
"enable": true
}
}
  1. Run the following command to update the ConfigMap. To avoid changing other settings in the ConfigMap, we commend that you run the kubectl patch command to update the ConfigMap.
kubectl patch cm -n koordinator-system slo-controller-config --patch "$(cat configmap.yaml)"
  1. Run the following command to query the CPU cores that are allocated to the BE pods on the node:
cat /sys/fs/cgroup/cpuset/kubepods.slice/kubepods-besteffort.slice/cpuset.cpus

Expected output:

10-25,35-51,62-77,87-103 

The output shows that the following CPU cores are allocated to the BE pods on the node: 10-25, 35-51, 62-77, and 87-103, which will be changed dynamically according to the load of latency-sensitve pods.